Rubicon Express CVO Drive Shafts

From $359.99

• Spicer drive shafts and components are as good as they get. Atlas transfer cases and any other 1310 series CV yoke. Measurements are taken center to center on the u-joint with the slip stub at the center of it's travel. measure your vehicle on the ground in the running position to get correct length.
• California Residents: WARNING

Rubicon Express CVF Drive Shafts

From $369.99

• Spicer drive shafts and components are as good as they get.
• Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of it's travel. measure your vehicle on the ground in the running position to get correct length.
• California Residents: WARNING

Rubicon Express Slip Yoke Eliminator Kits

From $194.99

• Stock Jeeps have a slip yoke style output shaft at the rear driveline. This design is not conducive to off road use nor the steeper operating angles caused by suspension lifts. To ensure smooth and durable driveline operation, convert to a fixed yoke output and install a CV drive shaft (style RE1898). A must on all lifts over 3.5 inch. This kit requires the modification of your stock output shaft. Drill and tap included for easy installation. Drive flange is machined from solid Stainless Steel for extreme strength and corrosion resistance.
• California Residents: WARNING

Rubicon Express Transfer Case Yokes

From $79.99

• Transfer Case Yoke
• Installation Hardware
• California Residents: WARNING

Rubicon Express Transfer Case Flange Adapters

From $34.65

• Billet aluminum flange
• 8mm-1.25 x 25mm socket cap screws
• California Residents: WARNING

Rubicon Express U-Joint

From $23.99

• Forged Cross
• Lubeable
• Outside Snap Ring
• Cup Size A= 1.062in.
• Outside To Outside A= 3.2190in.
• Cup Size B= 1.062in.
• Outside To Outside B=3.625in.
• California Residents: WARNING

Rubicon Express Transmission Mount Bracket

From $26.34

• Transmission Mount Bracket
• Installation Hardware
• California Residents: WARNING

Yukon Gear & Axle Spin Free Locking Hub Conversion Kits

From $2,299.89

• Heavy-duty 4340 chromoly outer axle stubs
• Premium Hardcore steel manual locking hubs with 1/3 - turn engagement
• Spindles and wheel hubs included
• Timken bearings, seals, and all necessary installation hardware
• Tapered roller bearings lower the cost to replace over factory unit bearing
• Spindle connects outer components to the steering knuckle
• Hardcore locking hubs allow for driving selectability, reducing wear on components

Yukon Gear & Axle Ring and Pinion Sets

From $1,999.89

Yukon Gear & Axle Differential Master Overhaul Kits

From $228.89

Yukon Gear & Axle Differential Tools

From $109.89

Yukon Gear & Axle Differential Covers

From $116.89

Yukon Gear & Axle Axle Bearing and Seal Kits

From $108.89

Yukon Gear & Axle Crush Sleeves

From $10.89

Yukon Gear & Axle Differential Cases

From $1,072.89

Yukon Gear & Axle Ball Joints

From $107.89

• For all your differential small parts needs, look no further than Yukon Gear & Axle.

Yukon Gear & Axle Pinion Shims

From $10.89

Yukon Gear & Axle Cross Pin Shafts and Bolts

From $10.89

• Cross pin shaft and bolts
• Available for various differential models

Yukon Gear & Axle Trac Loc Positraction Differentials

From $1,999.89

• Available for different makes and models
• Available in different gear ratios
• Built with high strength and with tight tolerances
• Gears are cut to provide the strongest teeth possible in any terrain

Yukon Gear & Axle Differential Carrier Installation Kits

From $111.89

• Available for different makes and models
• Available for different sizes
• Includes carrier bearings and races and carrier shim kit

Yukon Gear & Axle Locking Hub Sets

From $2,999.89

Yukon Gear & Axle Axle Bearings

From $127.89

Yukon Gear & Axle Axle Bushing

From $80.89

Yukon Gear & Axle Open Carrier Cases

From $199.89

• Standard open carrier case
• Available for different makes and models
• Available for different sizes