Rigid Industries SR-Q Series Marine LED Lights

From $199.99

• The Wake Flame SXL underwater light from Rigid Industries LED Lighting is designed to be installed on watercraft below the waterline. The 6.2 inch x 4.7 inch oval billet aluminum housing utilizes a Triplex? coating process that is up to 5 times stronger than MIL-A-8625 (Military spec for anodic coatings). This process safely allows for the use of aluminum in salt water environments. All Wake Flame underwater lights function as a master, slave, or stand alone light system. The Wake Flame works with or without DMX controllers as well as with multiple lights. Limited Lifetime Warranty. The Wake Flame comes with all necessary hardware and a 3+ meter wire lead. The bolts used to mount the Wake Flame are visible on the Surface Mount version.
• California Residents: WARNING

Rigid Industries SR-Series Light Covers

From $11.99

• Available in: Black, white, clear, blue, and green
• Easy to snap on and off
• Polycarbonate plastic
• Extra layer of protection

Rigid Industries Fog Light Kits

From $949.99

• Stainless Steel Construction
• Black Powder Coat Finish
• Includes All Necessary Hardware
• Limited Lifetime Warranty
• Made in the USA
• California Residents: WARNING

Rigid Industries E/RDS Series LED Light Bar Resonance Dampers

From $19.99

Rigid Industries E-Series Light Bar Cradles

From $26.99

• For E-series lights
• Hardware included
• California Residents: WARNING

Bushwacker Trail Armor Hood Stone Guards

From $115.99

• Diamond textured black plastic
• 100% UV resistant
• No drilling required
• California Residents: WARNING

Rigid Industries Dually XL Series Light Cover

From $11.99

• Dually XL Series
• Light Cover
• Black
• Polycarbonate Plastic
• California Residents: WARNING

Rigid Industries SR-Series Cradle

From $31.99

• Rigid has the mounting system you're looking for to meet your vehicle's lighting needs. Install your new Rigid LED's in a variety of configurations with one of Rigid's vast selection of installation brackets, cradle mounts, tube mounts, tab mounts, windshield mounts and more.
• California Residents: WARNING

Rigid Industries 1M Extension Add A Light

From $42.99

• 14 AWG Wire
• Deutsch DT Connector
• California Residents: WARNING

Rigid Industries RDS Series Light Covers

From $13.99

• RDS Series
• Light Cover
• Black
• California Residents: WARNING

Rigid Industries SR-Q-Series Light Covers

From $13.99

• Easy to snap on and off
• Polycarbonate plastic
• Extra layer of protection
• California Residents: WARNING

Rigid Industries SR-M Series Light Covers

From $8.99

• These SR-M Light Covers from Rigid Industries are the perfect solution for style and function. With multiple color options, you can give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your SR-M LED light. Add the Amber light cover to your lights for improved visibility in snow or fog. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights.
• California Residents: WARNING

Rigid Industries Q-Series Light Covers

From $13.99

• Rigid Industries Light Covers are the perfect solution for protecting your investment with both style and function. They are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your Rigid Industries light. The different color options provide a unique look as well as customized performance in different environments. For example, add an amber light cover for improved visibility in snow, fog, and dust. They are also perfect for areas with laws requiring covers on accessory lights.
• California Residents: WARNING

Rigid Industries D-SS Light Covers

From $11.99

• Customize RIGID's D-SS Side Shooter LED Lights
• Easy to install
• Available in multiple colors: Black, Amber, Blue, Red, White, Green, Smoke, and Clear
• California Residents: WARNING

Rigid Industries Wire Harnesses

From $115.99

• 3-Wire Light Wire Harness
• Single Light
• High Power
• This 13' wiring harness is designed to connect a single 20"-50" E Series Amber/White LED light bar to your 12V electrical system
• It incorporates an inline fuse holder, a 14V relay, and a waterproof switch
• California Residents: WARNING

Rigid Industries Vertical Bar Mounts

From $70.99

• Rigid has the mounting system you're looking for to meet your vehicle's lighting needs. Install your new Rigid LED's in a variety of configurations with one of Rigid's vast selection of installation brackets, cradle mounts, tube mounts, tab mounts, windshield mounts and more.
• California Residents: WARNING

Rigid Industries Light Switches

From $14.99

• Length: 24 inch long from end to end
• California Residents: WARNING

Rigid Industries RAM Suction Arm Plate

From $53.99

• To accommodate Rigid Industries' SR-M Series, SR-Q Series and D-Series LED Lights, Rigid Offers 17 different custom RAM mounting systems. You may choose from three different surface attachment methods: Suction Cup, Flat Surface Bolt-Down or a Pole Clamp. You can choose from three different arm lengths: short, medium, or long. You can also choose a single light attachment point or a plate for mounting multiple lights. RAM Mount's ball and joint design allows for a full 360? rotation. RAM Mounts are extremely durable (supports up to 5 lbs in a rugged environment), all stainless steel hardware, provide maximum adjustability and are backed by RAM Mounts' lifetime warranty.
• California Residents: WARNING

Rigid Industries E-Series Light Covers

From $11.99

• E-Series light covers
• Available in black, clear, white, red, blue, and camo
• Easy to snap on and off
• Polycarbonate plastic
• Extra layer of protection
• California Residents: WARNING

Bushwacker DRT Style Fender Flares

From $261.99

• Made from ABS Thermoplastic
• Pocket/Rivet style
• Sold in a set of 4 pieces or a front or rear pair
• Flares height is 4.5 inches
• Tire coverage is 3 inches
• Mounting hardware is included

Rigid Industries 360-Series LED Round Lights

From $411.99

• Patented optics
• 50,000 hr+ LED lifespan
• 9-36 VDC
• Black exposed printed circuit board
• Back-lighting independently controlled
• Alloy housing and heatsink
• Dedicated wire to run back-lighting without primary LEDs
• Pressure equalizing vent
• Sold as a pair

Rigid Industries SR-L Series Spreader Lights

From $179.99

• 9-36 VDC
• Pressure equalizing valve
• High impact polycarbonate lens
• Dedicated wire to run backlight
• Removable surround for color matching
• Wiring harness sold seperately #40300
• Halo backlight available in blue, red, white, & amber
• Surface mount and flush mount available
• 120 degree wide beam pattern
• No exposed hardware
• High grade aluminum alloy housing and heatsink

Rigid Industries Radiance Plus SR-Series RGBW LED Light Bars

From $1,016.49

• Single Row LED Light Bar With 8 Backlight
• Options: Red, Green, Blue, Light Blue, Purple, Amber, White Or Rotating
• 10 Year Warranty 9-15 V DC Harness And Switch Sold Separately
• Back Lighting Independently Controlled Using Switch Logic
• Black Powder Coat Finish
• Pressure Equalizing Vent
• IP68 Compliant - Dust/Water Ingress
• High Grade Aluminum Alloy Housing And Heat Sink Over/Under Voltage Protection
• High Impact Polycarbonate Lens
• Mounting Brackets Included
• RFI/EMI Protection
• RoHS Compliant
• Off road use only

Bushwacker Forge Style Fender Flares

From $449.99

• Bushwacker Forge Style Fender Flares