Poison Spyder BFH Front Bumpers

From $429.99

• This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible.
• It is no wider than the Jeep's frame rails
• CNC laser-cut from a single piece of high strength 3/16 inch plate steel
• The BFH™ bumper features an integrated winch mount and one-piece design.
• At a mere 35 pounds, the BFH™ is among the lightest bumpers on the market.
• Even fully outfitted with Brawler Bar and Heavy Duty Shackle Tabs, the BFH™ weighs only 43 pounds!
• California Residents: WARNING

Poison Spyder Brawler Full Width Front Bumpers

From $683.99

• Full Width
• Plate Steel Construction
• Brawler Bar
• Easy Installation
• Recessed Fog Lamp Mounts
• Winch Compatibility
• Recovery Shaackle Tabs
• Optional Brawler Lite Skid
• California Residents: WARNING

Poison Spyder Tire Carrier Delete Plates

From $57.99

• Poison Spyder Customs Tire Carrier Delete Plates fit perfectly over the raised vent area in the center of the tailgate
• Textured black powder coat for durability
• Easily installs using the stock tire carrier mounting bolts.
• California Residents: WARNING

Poison Spyder RockBrawler Bumpers

From $579.99

• This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
• The ends of the bumper extend far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.
• The two D-ring shackle mounts are CNC-machined from 1 inch plate steel to provide brute strength for the most demanding recovery operations.
• Accepts most major manufacturer's winches up to 15,000 lbs. capacity
• Recessed light mounts are provided for retention of the factory fog lamps or aftermarket off-road lamps
• California Residents: WARNING

Poison Spyder 3-Way Spare Tire Straps

From $79.99

• Designed for Poison Spyder tire carrier
• Ratchet strap design
• Built for rigorous wheeling
• California Residents: WARNING

Poison Spyder Rear Bumper Brace Kits

From $58.99

• 3/16 inch steel plate
• Gussetted brace
• California Residents: WARNING

Rough Country Front Bumpers

From $1,039.95

• Easy bolt-on installation
• Aggressive appearance
• Recessed winch plate
• Integrated fog light mounts
• Fog mounts work with factory fog lights
• Durable black carbon powdercoating
• Gain more tire clearance and achieve better approach angles
• Fairlead mounts to the outside of the bumper for ease of use
• Will accommodate most winches on the market

Rough Country Rear Bumpers

From $389.95

• Durable steel construction
• Protects vehicle from on & off-road debris
• 100% bolt-on installation procedure
• Installation hardware included

Rough Country Bull Bars

From $189.95

• Easy bolt-on install
• 3" diameter tubing
• Corrosion resistant
• Includes pre-drilled holes to add additional lighting
• Added protection for the front end of your vehicle
• Features die-cut "RC" logo
• 5-year limited warranty

Rough Country Stinger Bar

From $119.95

• Durable finish
• Built from 120 wall, 2" thick steel
• Aggressive appearance
• ONLY fits Rough Country front bumper kits
• Easy bolt-on installation

Rough Country Spare Tire Relocation Brackets

From $159.95

Rough Country Bed Mounted Tire Carrier

From $199.95

• Allows for use of up to a 40-inch tire
• Adjustable mount to account for tire size and wheel offset
• Rubber gaskets keep bed free from scrapes or scuffs
• Durable, steel construction
• Powder coated black for corrosion resistance
• Drilling required for installation

Poison Spyder Crawler Rear Bumpers

From $789.99

• Compatible with Poison Spyder Frame Mounted Tire Carrier
• Large radius bends and die-formed features
• Integrated Class III Tow Hitch
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed mounts for LED backup lights
• California Residents: WARNING

Poison Spyder Bruizer Front Bumpers

From $839.99

• Compact design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
• Recessed winch mount
• Brawler Bar made of DOM tubing with tube gussets
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed light mounts accept LED cube lights
• California Residents: WARNING

Poison Spyder RockBrawler Rear Bumpers

From $499.99

• The Poison Spyder Rear Stinger Wrangler rear bumper is available in Bare Steel or Black Powder Coat
• 3/16 inch plate steel
• Maximize performance on the toughest trails
• High clearance, multi-faceted design Jeep rear bumper
• California Residents: WARNING

Poison Spyder Brawler Lite Front Bumpers

From $799.99

• The RockBrawler™ is fabricated from 3/16 inch steel plate, CNC laser cut and brake-formed for a precise fit.
• The Stinger is made of 1.75 inch X .120 wall DOM tubing.
• The two D-ring shackle mounts are CNC-machined from 1 inch plate steel.
• The integrated winch mount accepts most major manufacturer's winches up to 15,000 lbs.
• Another characteristic of the RockBrawler™ is its amazing tire clearance.
• RockBrawler™ bumpers are shipped as BARE STEEL.
• California Residents: WARNING

Poison Spyder Body Mounted Tire Carriers

From $999.99

• Poison Spyder Jeep Spare Tire Carrier
• Bare steel
• CNC laser cut
• Fit up to 40 inch tire and wheel combo on this Jeep tire carrier
• Mount for Hi-Lift jack
• Includes all mounting hardware
• California Residents: WARNING

Poison Spyder BFH Rear Bumpers

From $329.99

• The Poison Spyder Customs BFH™ Wrangler rear bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit.
• Recovery Shackle Tabs are machined from 1" thick plate steel
• This Jeep rear bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep.
• NOTE: Install requires cutting of stock frame rails!
• California Residents: WARNING

Poison Spyder Rear Stinger Tire Carriers

From $769.99

• The Poison Spyder Rear Stinger Jeep rear bumper is designed for those who spend most of their time in the rocks and need a tire carrier that meets the challenge.
• By pulling the two upper pins,The Rear Stinger is basically a fold-down spare tire carrier.
• This part number is for the "DIY" Rear Stinger Tire Carrier without the Lower Mount Plate.
• The Tire Carrier includes an integrated skid plate with laser cut lightning holes and Spyder logo.
• It also has an integrated license plate mount located in the center of the carrier.
• Tabs for the lower straps and a loop for the upper strap provide a secure mount for the 3-Way Spare Tire Strap.:This product ships as bare steel—it will need to be painted or powder coated prior to final installation as your Wrangler rear bumper.
• California Residents: WARNING

Poison Spyder BFH II Front Bumpers

From $629.99

• Lightweight, high clearance "stubby" bumper design
• Made of 1.5" X .120" wall DOM tubing with 3/16" plate steel gussets
• SpyderShell Armor Coat semi-gloss black finish
• Recessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)
• High clearance recovery shackle tabs CNC machined from 1" thick plate steel
• California Residents: WARNING

Poison Spyder Bruizer Rear Bumpers

From $799.99

• Compatible with Poison Spyder Frame Mounted Tire Carrier
• Multi-faceted high clearance design
• Integrated Class III Tow Hitch
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed mounts for LED cube lights
• California Residents: WARNING

Poison Spyder Crawler Front Bumpers

From $799.99

• Compact, multi-faceted design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
• Large radius bends for strength and great looks
• Brawler Bar made of DOM tubing with tube gussets
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)
• California Residents: WARNING