Rolling into Wheel & Tire Month! Shop Now

Bestop Bumper Poison Spyder Customs Bestop

REFINE BY:

Brand

Smittybilt (42)
4 Wheel Parts (2)
Addictive Desert Designs (146)
ARB 4x4 Accessories (132)
Body Armor 4x4 (52)
Crown Automotive (1)
DV8 Offroad (49)
Fab Fours (851)
Go Rhino (55)
N-Fab (55)
View More
Omix-Ada (6)
Rampage (31)
Road Armor (574)
Rock-Slide Engineering (6)
Rough Country (107)
RT Off-Road (5)
Rugged Ridge (88)
TrailFX (52)
Warn (74)
Westin (40)

Fitment

Direct Fit (21)

D-Ring Mount Included

D-ring Mount Included (13)
No (1)
Yes (5)

Finish

Bare (4)
Powder Coat (5)
Primer (1)
Semi-gloss Black (3)
Textured Black (7)

Light Mounts Included

Light Mounts Included (9)
Light Mounts Not Included (4)

Material

Steel (15)

Tire Carrier

No (5)

Width

Full (5)
Mid (1)
Stubby (7)

Price Range

$300 to $399 (3)
$400 to $499 (3)
$500 to $749 (7)
$750 to $999 (8)

12 Product Groups

Switch to View Products

SORT BY

Poison Spyder RockBrawler Rear Bumpers

From $499.99

The Poison Spyder Rear Stinger Wrangler rear bumper is available in Bare Steel or Black Powder Coat
3/16 inch plate steel
Maximize performance on the toughest trails
High clearance, multi-faceted design Jeep rear bumper
California Residents: WARNING

From $499.99

4.3 4.3 (32)

Poison Spyder Brawler Lite Front Bumpers

From $799.99

The RockBrawler™ is fabricated from 3/16 inch steel plate, CNC laser cut and brake-formed for a precise fit.
The Stinger is made of 1.75 inch X .120 wall DOM tubing.
The two D-ring shackle mounts are CNC-machined from 1 inch plate steel.
The integrated winch mount accepts most major manufacturer's winches up to 15,000 lbs.
Another characteristic of the RockBrawler™ is its amazing tire clearance.
RockBrawler™ bumpers are shipped as BARE STEEL.
California Residents: WARNING

From $799.99

4.7 4.7 (19)

Poison Spyder BFH Front Bumpers

From $449.99

This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible.
It is no wider than the Jeep's frame rails
CNC laser-cut from a single piece of high strength 3/16 inch plate steel
The BFH™ bumper features an integrated winch mount and one-piece design.
At a mere 35 pounds, the BFH™ is among the lightest bumpers on the market.
Even fully outfitted with Brawler Bar and Heavy Duty Shackle Tabs, the BFH™ weighs only 43 pounds!
California Residents: WARNING

From $449.99

4.5 4.5 (46)

Poison Spyder BFH Rear Bumpers

From $329.99

The Poison Spyder Customs BFH™ Wrangler rear bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit.
Recovery Shackle Tabs are machined from 1" thick plate steel
This Jeep rear bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep.
NOTE: Install requires cutting of stock frame rails!
California Residents: WARNING

From $329.99

4.8 4.8 (4)

Poison Spyder BFH II Front Bumpers

From $629.99

Lightweight, high clearance "stubby" bumper design
Made of 1.5" X .120" wall DOM tubing with 3/16" plate steel gussets
SpyderShell Armor Coat semi-gloss black finish
Recessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)
High clearance recovery shackle tabs CNC machined from 1" thick plate steel
California Residents: WARNING

From $629.99

4.8 4.8 (5)

Bestop HighRock 4x4 High-Access Front Bumpers

From $594.99

Sturdy winch and fairlead attachment plate accommodates most standard-sized winches.
3/16 inch laser cut steel with E-coat, wrinkle finish powder coat.
Developed specifically for the hard core rock crawler.
Sturdy winch plate is included and accommodates most standard-sized winches.
Optional tubular Grille Guards for front bumper help protect grille and headlights and is available in textured satin or matte black finish or stainless steel.
D-Ring Attachment ears extend through bumper and fully mig-welded front and back.
D-Rings sold separately
Bolt-on, no-drill installation to factory mounting locations
Accessories shown are not included.
California Residents: WARNING

From $594.99

4.4 4.4 (21)

Poison Spyder RockBrawler Bumpers

From $579.99

This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
The ends of the bumper extend far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.
The two D-ring shackle mounts are CNC-machined from 1 inch plate steel to provide brute strength for the most demanding recovery operations.
Accepts most major manufacturer's winches up to 15,000 lbs. capacity
Recessed light mounts are provided for retention of the factory fog lamps or aftermarket off-road lamps
California Residents: WARNING

From $579.99

5.0 5.0 (1)

Bestop HighRock 4x4 Narrow-Profile Front Bumpers

From $369.99

3/16 inch laser cut steel with E-coat and wrinkle finish powder coat top layer
JK bumper measures 41.5 inch wide, 11 inch deep, 8 inch high
TJ bumper measures 35.5 inch wide, 9 inch deep, 5.5 inch high
JK model has welded fairlead plate
TJ winch plate included separately with bumper.
JK model comes standard with pre-cut holes and molded plastic light cans to accommodate OEM lights
Optional tubular Grille Guards available in textured satin or matte black finish or stainless steel.
D-Ring Attachment ears extend through bumper and fully mig-welded front and back. D-Rings sold separately
Bolt-on, no-drill installation to factory mounting locations
Accessories shown are not included.
California Residents: WARNING

From $369.99

4.4 4.4 (18)

Bestop HighRock 4x4 Full Width Front Bumpers

From $574.99

Sturdy winch and fairlead attachment plate accommodates most standard-sized winches.
3/16 inch laser cut steel with E-coat, wrinkle finish powder coat.
Developed specifically for the hard core rock crawler.
Sturdy winch plate is included and accommodates most standard-sized winches.
Optional tubular Grille Guards for front bumper help protect grille and headlights and is available in textured satin or matte black finish or stainless steel.
D-Ring Attachment ears extend through bumper and fully mig-welded front and back. D-Rings sold separately.
Bolt-on, no-drill installation to factory mounting locations
Accessories shown are not included.
California Residents: WARNING

From $574.99

3.3 3.3 (3)

Poison Spyder Crawler Front Bumpers

From $799.99

Compact, multi-faceted design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
Large radius bends for strength and great looks
Brawler Bar made of DOM tubing with tube gussets
SpyderShell™ Armor Coat semi-gloss black finish
Recessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)
California Residents: WARNING

From $799.99

4.8 4.8 (5)

Poison Spyder Crawler Rear Bumpers

From $789.99

Compatible with Poison Spyder Frame Mounted Tire Carrier
Large radius bends and die-formed features
Integrated Class III Tow Hitch
SpyderShell™ Armor Coat semi-gloss black finish
Recessed mounts for LED backup lights
California Residents: WARNING

From $789.99

4.7 4.7 (3)

Poison Spyder Bruizer Front Bumpers

From $839.99

Compact design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
Recessed winch mount
Brawler Bar made of DOM tubing with tube gussets
SpyderShell™ Armor Coat semi-gloss black finish
Recessed light mounts accept LED cube lights
California Residents: WARNING

From $839.99

4.6 4.6 (25)