TeraFlex Alpine CT4 Suspension Systems

From $4,582.93

• Dependable Performance With Zero Worries
• Positive, Responsive Handling W/ Reduced Vibration & Harshness
• Fully Adjustable Long Alpine Flexarms Optimize Correct Caster & Pinion Angles For 4” Lift Kits
• High Quality, Factory Style Bushings Provide Excellent Vibration Damping & Ride Quality With Zero Maintenance
• Front & Rear Heavy Duty Adjustable Track Bars
• Speedbump Progressive Bump Stops
• Full Range Of Movement For Off-Road Flex & Articulation
• Cutting & Welding Required
• Alignment Required
• Teraflex Lifetime Warranty
• Fits Up To 37” Tires
• California Residents: WARNING

TeraFlex Alpine RT3 Suspension Systems

From $3,590.96

• Delivers true Rogue Trail (RT) performance
• Dependable performance with zero worries
• Positive, responsive handling with reduced NVH
• Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping
• Maintenance-free IR Bushings improve on- and off-road ride quality and performance
• Adjustable Alpine IR Front Track Bar and Front (3.5”+) and Rear Track Bar Brackets improve steering response
• Centers axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
• Front SpeedBump and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
• Full range of movement for off-road flex and articulation
• Install and drive simple bolt-on installation – no welding required
• TeraFlex Limited Lifetime Warranty against defects
• Requires aftermarket wheels with 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels
• Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires

TeraFlex Alpine RT4 Long Arm Suspension Systems

From $5,248.93

• Adjustable Alpine IR Long Control Arms & Brackets balance front caster angle and pinion angles
• Optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6” lift kits
• Alpine IR Long Control Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength
• Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop
• Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength with reduced NVH compared to other long arm kits
• Delivers true Rogue Trail (RT) performance
• Dependable performance with zero worries
• Positive, responsive handling with reduced NVH
• Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping
• Maintenance-free IR Bushings improve on- and off-road ride quality and performance
• Adjustable Alpine IR Front Track Bar and Front (3.5”+) and Rear Track Bar Brackets improve steering response
• Centers axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
• Front SpeedBump and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
• Full range of movement for off-road flex and articulation
• Install and drive simple bolt-on installation – no welding required
• TeraFlex Limited Lifetime Warranty against defects
• Requires aftermarket wheels with 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels
• Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires

TeraFlex Alpine CT3 Suspension System

From $2,798.95

• Install & Drive Simple Bolt-On Installation
• Dependable Performance With Zero Worries
• Positive, Responsive Handling W/ Reduced Vibration & Harshness
• Fully Adjustable Alpine Flexarms Optimize Correct Caster & Pinion Angles For 3” Lift Kits
• High Quality, Factory Style Bushings Provide Excellent Vibration Damping & Ride Quality With Zero Maintenance
• Front Heavy Duty Adjustable Track Bar
• Speedbump Progressive Bump Stops
• Full Range Of Movement For Off-Road Flex & Articulation
• No Alignment Or Adjustment Required
• Teraflex Lifetime Warranty
• Fits Up To 35” Tires
• California Residents: WARNING

AMP Research Air Tank Relocation Kit

From $59.99

TeraFlex Brake Rotors

From $135.99

• Brake rotor is mill balanced and machined for the internal parking brake
• Replacement slotted rotor is a direct replacment
• Mill-balanced, vented and slotted rotor provides greater braking leverage to allow stopping distance to be decreased substantially and decreases heat buildup
• California Residents: WARNING

TeraFlex Alpine CT2 Suspension Systems

From $2,534.94

• Available with or without shocks
• Adjustable Alpine Control Arms balance front caster angle and pinion angles
• Optimize rear pinion angles on 0-4.5” lift kits
• Delivers true Cross-Trail (CT) performance
• Dependable performance with zero worries
• Positive, responsive handling with reduced NVH
• High-quality, maintenance-free factory-style bushings provide excellent vibration damping and ride quality
• Falcon Progressive Front & Rear Bump Stops provide progressive compression during high-speed suspension movement
• Adjustable Alpine IR Front Track Bar and Front (3.5”+) and Rear Track Bar Brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
• Full range of movement for off-road flex and articulation
• Install and drive simple bolt-on installation – no welding required
• TeraFlex Lifetime Warranty
• Requires aftermarket wheels with 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels – NOT INCLUDED

TeraFlex Tera44 HD Axle Assemblies

From $2,974.99

• 3.25” O.D. x 0.25” wall axle tube increases torsional strength to resist bending with minimal weight increase
• Asymmetric housing design for extra-long tube side strength
• Pre-installed inner axle seals
• HD forged inner knuckles with greater upper and lower section strength
• Ductile cast iron housing with increased rib gussets
• HD ductile iron differential cover
• Smooth radius bottom design to glide over rocks and obstacles
• Integrated lower control arm skid plates
• High-flow oil passages and bottom oil drain hole for simple fluid changes
• Reinforced front track bar mount (ties into spring pad) for greater strength
• UV protected triple-stage powder coat for corrosion resistance
• 1/4”-thick CNC laser cut axle brackets for extreme strength
• Integrated factory location upper control arm mount
• Pre-installed upper control arm bushings
• Proper pinion angle for lifted applications
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Retains all ESP, ABS, and speedometer sensor capability
• 100% engineered, designed, and built in the USA with new components

TeraFlex Rubber Bushings

From $57.99

• The TeraFlex TJ rear upper small FlexArm rubber Joint provides excellent off-road capabilities with articulation and durability
• The rubber bushing provides superior vibration damping, reduces road noise, eliminates clunks, and maintains proper position for maximum articulation during travel
• Sold Individually
• California Residents: WARNING

TeraFlex Flexarm Suspension Systems

From $1,828.99

• Includes Lift Coil Springs
• Front Adjustable Track Bar
• Shock Absorbers (Depending On Kit)
• Lower And Upper Adjustable Flexarms (Depending On Kit)
• Front Sway Bar Disconnects
• Rear Sway Bar Links
• Rear Track Bar Bracket
• Bump Stops And All Necessary Hardware
• California Residents: WARNING

TeraFlex Sport ST4 Suspension Systems

From $1,579.96

• Available with or without shocks
• Delivers true street & trail (ST) performance
• Dependable performance with zero worries
• Positive, responsive handling with reduced NVH
• Front (3.5”+) and Rear (2.5”+) Track Bar Brackets correct caster angle, steering geometry, center the axles, and reduce body roll
• Falcon Progressive Front & Rear Bump Stops protect occupants and the vehicle from hard suspension bottoming
• Full range of movement for off-road flex and articulation
• Install and drive, simple bolt-on installation – no welding required
• No alignment required
• Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35” or larger tires
• Requires aftermarket wheels with 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels
• Max Tire Size: Sport/Sahara Fenders: 35” (with 3” front & 2.5” rear bump stops), Sport/Sahara Fenders: 37” (with 3.5” front & 4” rear bump stops) and Rubicon Fenders: 37” (with 2.5” front & 3” rear bump stops)
• TeraFlex Lifetime Warranty