Brake Controllers And Electrical

If your trailer is equipped with brakes you will need a controller to make them work. We have many high tech controllers to help you tow with greater control and safety.

These Connector Harnesses are designed to take the headache out of wiring up your brake controller. These harnesses will make installation a simple plug and play operation.

Take the frustration out of trying to wire up your trailer lights with these trick plug and play connector kits.

Prevent dirt and corrosion from causing shorts and failure of your trailer lights with these wire end caps.

These Trailer Wire Harnesses will help you to wire up your vehicle for trailer towing lights. No more hanging wires to get tangled up and short out.

These Mounting brackets provide a clean and professional look as well as a strong and convenient trailer plug mount.

Most trailers operate on a two wire system where the brake lights and turn signals operate on the same wire. When the towing vehicle has separate wires for brake lights and turn signals, a taillight converter is required. Converters convert a 3 wire system vehicle to a standard 2 wire trailer system. Converters draw all the power for the trailer through the vehicle circuit

These Trailer Wire Adapters will allow you to adapt one type or trailer plug to another without the need to modify your trucks wiring.

These Trailer Wiring Test Lights ensure your trailer's wiring is safe & functioning properly.

Prevent damage to your electrical system by installing a Circuit Breaker. A Circuit Breaker is basically a resettable fuse. When if your system overloads the breaker will disconnect power and after a short cool down period will restore power.

When preparing your vehicle don't forget to upgrade your turn signal flasher. The factory flasher usually cannot handle the extra load of additional lights causing it to cycle too quickly.

Use these prewired towing lights for occasional flat towing vehicles or small utility trailers. These lights simply stick to your vehicle in tow with magnets and plug into your trucks tow light plug.

When building a custom trailer or redoing an older one these complete kits are designed to take the guess work out of wiring your trailer.

These Cargo Trailer Lighting Kits mount to your hitch mounted cargo carrier and features stop, tail, turn lighting, mounting brackets and wiring.