Last Day for Ground Christmas Delivery

Truck and Jeep Parts Home » Drivetrain & Differentials » Drive Shaft Universal Joint » 1310 Series Heavy-Duty U-Joint

1310 Series Heavy-Duty U-Joint

Dana Spicer | Part Number: D/S5-1310X
  • Technical Details

    • Forged Cross
    • O.E.M Replacement
    • Outside Snap Ring
    • Cup Size A= 1.062in.
    • Cup Size B= 1.062in.
    • Outside To Outside= 3.2190in.

Dana Spicer U-Joints are one of the most trusted U-Joints in the high performance market place. Dana Spicer has been manufacturing U-Joints for well over 50 years and has been a trusted manufacture for many heavy duty and light duty truck builders. Dana Spicer uses only premium materials machined to the highest quality standards in the industry.

U-Joint SeriesLubeable
1310No

Customer Reviews

Average Customer Review
 

Questions & Answers

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

11 Questions | 12 Answers
Displaying questions 1-10Previous | Next »
  • Q:

    Will these work on my 2007 rubicon Dana 44 front axil
    Asked on 9/11/2014 by Rickster from Regina , SK , Canada

    1 answer

    • CUSTOMER CARE

      A:

      hello
      The Dana number you need for the axles is D/S5-7166x

      Answered on 9/12/2014 by Rody from Compton
  • Q:

    Will this work on my stock 1999 Jeep Cherokee Sport XJ front drive shaft?
    Asked on 8/11/2014 by Reers!!! from Graham, NC

    1 answer

    • CUSTOMER CARE

      A:

      Hello
      Yes that u-joint will fit the stack drive shaft.

      Answered on 8/11/2014 by Rody from Compton
  • Q:

    Will this work on my 2001 wrangler sport? I have stock drive shafts.
    Asked on 7/17/2014 by Chris from Burbank, Ca

    1 answer

    • CUSTOMER CARE

      A:

      Hello Chris
      Yes that is the u-joint you need for your Jeep.

      Thanks

      Answered on 7/17/2014 by Rody from Compton
  • Q:

    Will this product work with my 2005 dodge ram 2500 4x4 with the Cummins engine
    Asked on 6/20/2014 by sam from delaware

    1 answer

    • Staff Reviewer

      A:

      Hi Sam
      Your 2005 Dodge used a drive shaft from AAM and we do not have a Spicer equivalent for that joint at this time. You may wish to try the dealer for a quality joint Thank You

      Answered on 6/23/2014 by Stevie from Compton Ca. U.S.A.
  • Q:

    Will this u joint work on my 1972 c10?
    Asked on 4/29/2014 by Fermloks from Los angeles,ca

    1 answer

    • Staff Reviewer

      A:

      Fermloks-

      Thank you for your question. The Dana Spicer 1310 Series Heavy-Duty U-Joint was used at the axle end for most applications. Measure your current U joint. The 1310 Joint has the measurements of Cup Size A= 1.062in.; Cup Size B= 1.125in.; Outside To Outside= 3.2190in

      Answered on 4/29/2014 by Mike from Compton
  • Q:

    Will this work with my 05 jeep liberty diesel?
    Asked on 3/29/2014 by Cody

    2 answers

    • Staff Reviewer

      A:

      Hi Cody
      This u joint will work at the rear axle end of the shaft but there is a option of two joints at the t/c end of the shaft. the book does not state which one is correct you will have to measure your existing joint and compare . the other option is the D/S5-790X Joint which is not listed on our site. Thank You

      Answered on 3/31/2014 by Stevie from Compton Ca. U.S.A.
    • Staff Reviewer

      A:

      Hi Cody
      This u joint will work at the rear axle end of the shaft but there is a option of two joints at the t/c end of the shaft. the book does not state which one is correct you will have to measure your existing joint and compare . the other option is the D/S5-790X Joint which is not listed on our site. Thank You

      Answered on 3/31/2014 by Stevie from Compton Ca. U.S.A.
  • Q:

    will this work in my 1988 chevy k1500 ext cab longbed? i want to replace all three ujoints in the drive shaft would they all be the same. thanks
    Asked on 3/23/2014 by ernnnn from cochranton, PA

    1 answer

    • Staff Reviewer

      A:

      Hi Ernnn
      Your truck used a combination of U Joints depending on tow rating ic could use the D/S5-1310 U Joints in some locations as well as the 3R U Joints D/S5-3147X in other locations please check the cross the joint measurements and compare them thank you

      Answered on 3/24/2014 by Stevie from Compton Ca. U.S.A.
  • Q:

    Will this work with a 2002 jeep grand cherokee overland 4.7L?
    Asked on 3/13/2014 by James

    1 answer

    • Staff Reviewer

      A:

      Hi James
      This is the correct U-Joint if your Jeep is not equipped with the Selec-Trac system. If you have Selec Trac you will require a 5-213X joint at the top rear at the T/c Thank You

      Answered on 3/13/2014 by Stevie from Compton Ca. U.S.A.
  • Q:

    Is this the correct product for a 2004 jeep wrangler x?
    Asked on 1/25/2014 by ssurak from Nashville, TN

    1 answer

    • Staff Reviewer

      A:

      Sarah-

      thanks for the inquiry. Yes the Dana Spicer 1310 u-joint would be the correct u-joint for your 2004 Jeep Wrangler X

      Answered on 1/25/2014 by DP from Compton, CA
  • Q:

    will this product work with 1998 wrangler tj sahara front driveshaft u joints at the transfer case and the differential yokes
    Asked on 12/15/2013 by doc

    1 answer

    • Staff Reviewer

      A:

      Hi Doc
      These are the correct for your 1998 Jeep TJ drive shaft U-Joints if you still have the factory drive shafts. Thank you

      Answered on 12/16/2013 by Stevie from Compton Ca.
Displaying questions 1-10Previous | Next »

Do you have a question about this product? 

  • Now Hiring

    4 Wheel Parts is Hiring

    To see all of our current job openings

    Apply Now

  • Catalogs

    4 Wheel Parts Catalog

    Free Full-Color
    Jeep & Truck Catalogs.

    Request a Catalog

  • Email Offers

    Sign up now to receive our latest promotions and exclusive offers.

  • Store Locator

    4 Wheel Parts Store Locator

    68 Stores in North America.
    Locate a store near you.

    Store Locator