Truck and Jeep Parts Home » Bumpers, Tire Carriers & Winch Mounts » Front Bumpers » Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat

Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat

Body Armor 4x4 | Part Number: B/ATC-19335
Help us ensure this part fits your vehicle Check Fitment
  • Technical Details

    • Fits 2005 to 2011 Toyota Tacoma
    • Front Winch mount
    • Subframe winch plate
    • Textured black powder coat
    • Re use OEM fog lights
    • D-ring mount

Exclusive 2 piece design keeps the weight down so this winch bumper won’t nose dive the front of the truck. 3/16? sub frame/winch plate is attached directly to the front frame rails for the ultimate in strength. Designed for up to a 9500 pound winch, side control box design works best. There is extra room to mount a small air compressor. The otter steel shell mounts up with eight bolts at the shackle points so the entire installation is all bolt on! 11 gauge outer shell provides strength while keeping the weight to a minimum. 4? light pockets will take either after market lights or the OEM fog lights. Additional mounting points for two more lights on top of the bumper. High clearance corners for maximum off road performance. Low center section provides skid plate type protection for the front area of the vehicle.

StingerTypeWinch Mount IncludedWidthGrille Guard IncludedLight Mounts IncludedFinishMaterialD-Ring Mount Included
NoHeavy DutyYesFullNoYesTexturedSteelYes

Other Products You May Be Interested In

Customer Reviews

Average Customer Review

REVIEW SNAPSHOT®

by PowerReviews
Body Armor 4x4Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat
 
4.0

(based on 1 review)

Reviewed by 1 customer

Displaying review 1

Back to top

(11 of 12 customers found this review helpful)

 
4.0

Bumper of bumpers

By Israel

from San Juan, PR

Verified Buyer

Pros

  • Heavy duty
  • Nice Rough Looking

Cons

  • Too Heavy 168lbs

Best Uses

  • Great look

Comments about Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat:

I like how it looks on my Tacoma, it turn heads. The weight of 168 lbs without a winch nor lights on top it's definitely a factor.

  • Was this a gift?:
  • No

Displaying review 1

Back to top

 

Questions & Answers

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

10 Questions | 11 Answers
Displaying questions 1-10
  • Q:

    I drive a 4x4 07 Toyota Tacoma with a 3 inch rough country suspension lift. its a 4 banger with 31 inch tires. would this bumper slow down or weigh the truck down to much? would it pull the front of the truck down? thanks.
    Asked on 10/10/2014 by hites tacoma from kingsport tn

    1 answer

    • CUSTOMER CARE

      A:

      Hello there, the Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat part number B/ATC-19335 will work with your truck. Now as far as the weight the product is 150LB. So I'm not sure whether or not if this bumper would slow down or weigh the truck. Please into consideration how long the kit has been installed & whether the springs are weaken. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

      Answered on 10/10/2014 by Ray Ray from Compton CA
  • Q:

    Hello,

    Is this bumper available without the Grill Guard? Is there a trim piece included to finish off the winch opening?

    Thanks,

    Chip
    Asked on 8/14/2014 by chip from San Clemente Ca.

    2 answers

    • CUSTOMER CARE

      A:

      Thanks for the inquiry chip, the Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat part # B/ATC-19335 according to the manufacturer the grill guard is textured black and comes with the bumper and is bolt on if you would like to mount it. As far as the hole for the winch we offer fairleads and fairlead covers just not a cover for the hole.

      Answered on 8/14/2014 by Anonymous
    • CUSTOMER CARE

      A:

      Thanks for the question Chip
      Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat, B/ATC-19335
      This bumper does not come with a grill guard or a steel plate to cover the winch opening.
      Thank you
      BJ
      Answer Box Sales
      Bdozois@4wheelparts.com
      310-900-5500 x5125

      Answered on 8/14/2014 by Anonymous
  • Q:

    Will This bumper fit the 2012 Tacoma Prerunner? and does it reuse the factory fog lights?

    Thanks,

    Chip
    Asked on 8/14/2014 by Chip from Orange County California

    1 answer

    • CUSTOMER CARE

      A:

      Thanks for the inquiry Chip, the Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat part # B/ATC-19335 does fit a 2012 Tacoma Pre-Runner and will be able to use the factory fog lights.

      Answered on 8/14/2014 by Anonymous
  • Q:

    Does the bumper cover the stock bumper or does the stock bumper have to be removed for the instillation of the new one?
    Asked on 5/19/2014 by Wahoo from Edinburg, tx

    1 answer

    • Staff Reviewer

      A:

      Hello Wahoo,

      Thank you for the question. The factory bumper must be removed to install the Body Armor 4x4 Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat Part Number: B/ATC-19335

      Answered on 5/20/2014 by Anonymous
  • Q:

    Will the bumper accommodate a 10,000# winch? Which ones?
    08' Toyota Tacoma
    Asked on 4/25/2014 by Bo from Gillette Wy

    1 answer

    • Staff Reviewer

      A:

      Hello Bo,

      Thank you for the question. Yes, this bumper will accommodate a 10,000lb winch.

      Answered on 4/28/2014 by Anonymous
  • Q:

    Looking for a 800lb WINCH to go with the front winch bumper with
    grill guard by Body Armor 4x4 and what size fog lights
    Thanks 2005 Toyota Tacoma Prerunner
    Rick
    Asked on 4/6/2014 by rick from CA

    1 answer

    • Staff Reviewer

      A:

      Thanks for asking. According to Body Armor the factory fogs for 2005-2011 should fit the Toyota Tacoma Front Winch Bumper with Grill Guard. As for an 8000 Lb winch to go with this bumper I would recommend the new Gen 2 Smittybilt XRC-9.5K winch that you can find here http://jo.my/a4dbml

      Answered on 4/7/2014 by DP from Compton, CA
  • Q:

    What Fog lights fit this bumper? The factory lights won't fit the bracket.
    Asked on 2/5/2014 by Mike from Fayetteville NC

    1 answer

    • Staff Reviewer

      A:

      Mike-

      Thanks for asking. According to Body Armor the factory fogs for 2005-2011 should fit this bumper. If you have the B/ATC-19336 2012-2013 Tacoma bumper it takes a universal 4-4.5" fog light.

      Answered on 2/6/2014 by DP from Compton, CA
  • Q:

    Does this bumper work with the airbags.
    Asked on 10/1/2013 by gimps

    1 answer

    • Staff Reviewer

      A:

      Gimps-

      Thanks for the question. Body Armor 4x4 does not specify this Toyota Tacoma Front Winch Bumper with Grill Guard in Textured Powder Coat to be airbag compatible. The only front bumper for the Tacoma that actually states airbag compatible is the ARB Bull Bar you can find here http://jo.my/vhqblj

      Answered on 10/2/2013 by DP from Compton, CA
  • Q:

    HOW MUCH DOES THE BUMPER WEIGH?
    Asked on 9/17/2013 by WAYNE from HOSCHTON, GA

    1 answer

    • Staff Reviewer

      A:

      Wayne-

      Thanks for the question. The Body Armor 4x4 Front winch bumper weighs in at 185lbs.

      Answered on 9/17/2013 by DP from Compton, CA
  • Q:

    Does this product come with a winch?
    Asked on 8/25/2013 by Stephen from United States

    1 answer

    • Staff Reviewer

      A:

      The Body Armor 4x4 Front Winch Bumper does not include the winch.

      Answered on 8/26/2013 by DP from Compton, CA
Displaying questions 1-10

Do you have a question about this product? 

  • Now Hiring

    4 Wheel Parts is Hiring

    To see all of our current job openings

    Apply Now

  • Catalogs

    4 Wheel Parts Catalog

    Free Full-Color
    Jeep & Truck Catalogs.

    Request a Catalog

  • Email Offers

    Sign up now to receive our latest promotions and exclusive offers.

  • Store Locator

    4 Wheel Parts Store Locator

    66 Stores in North America.
    Locate a store near you.

    Store Locator